I´ve upgraded Sharepoint 2007 to 2010 and now I get this error in the central administration
Could not load file or assembly 'Microsoft.SharePoint.ApplicationPages.Administration, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified.
How can I fix it ? Any one can help ?
Note,
I upgraded from sharepoint 2007 but in was installed in Windows server 2003 (x86, 32-bit)
Hello SharePoint Family,
I have noticed a database file called tempdb that has grown bigger than normal. It is currently at 15GB and I am wondering is this okay to totally truncate or empty somehow? Last time this file shows modified was 6/25/2013.....can someone explain what exactly this DB is responsible for and what could happen if I was to remove this file?
Thanks so much n advance
Hello!
As the title says I have installed Sharepoint 2013 on a Windows Server 2012 VM. Each time I run the setup it completes with all pre-reqs being installed and generates no errors. I went all the way through and created a site collection at the root ( / ), created the required DNS entries which ping successfully, but every time I try and open the site http://intranet.businessname.org I get a 404 error. It wont even open on the server itself. The only error I see in event viewer has to do with the STS application pool and I have made every change I could find googling this issue but it still wont open.
Hi,
I tried to patch a Sharepoint 2010 server, but this failed due to "corrupted features.". Which were OOTB by the way.
I now have a list of the suspect features. However, could I copy the features from another farm and attempt the patch integration again?
Thanks
Hi, I've found that I can add the SharePoint version to a given Word (*.docx) file. This is using the method of Information Management Policy Settings and Word Quickparts.
I have a problems before I attempt to roll this out - most of the files in the document library are .doc extension types and they all currently have a few versions (e.g, v1.0, v2.0, v3.0). I would like to convert these files to .docx file types whilst maintaining the older versions if possible.
Does anybody know how I can do this please?
Hi All,
Intermittently(Data displaying fine and in a 2 or 3 minutes getting error. Again after 2minutes data were displaying.) i am getting the below error in site home publishing page. This data form is located in page layout.
"Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator."
At a time this issue occurred in Production, QA, UAT. These 3 environments have configured with third party data source. This form has been working for months without any issues. I am thinking that some changes done in our third party data source or third party data source network issues.
I checked with Logs, but i could not understand what is the main issue.
Leaving Monitored Scope (GetFileAndMetaInfo). Execution Time=18.773335717249 Leaving Monitored Scope (GetWebPartPageContent). Execution Time=18.9809039975751 Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=20.5576407057322 Error while executing web part: System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a send. ---> InnerException 1: System.IO.IOException: The handshake failed due to an unexpected packet format. at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async) - -- End of inner exception stack trace --- at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context) at System.Net.HttpWebRequest.GetRequestStream() at Microsoft.SharePoint.WebControls.SoapDataSource.GetResponseString(SoapCommand currentSoapCommand) at Microsoft.SharePoint.WebControls.SoapDataSource.ExecuteInternal(SoapCommand currentSoapCommand) at Microsoft.SharePoint.WebControls.BaseXmlDataSource.Execute(String request) at Microsoft.SharePoint.WebControls.BaseXmlDataSource.GetXmlDocument() at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigatorInternal() at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigator() at Microsoft.SharePoint.WebControls.SyncMergedDataSource.GetXPathNavigator() at Microsoft.SharePoint.WebControls.AggregateDataSourceView.get_AggregateNavigator() at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigator() at Microsoft.SharePoint.WebPartPages.DataFormWebPart.GetXPathNavigator(String viewPath) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform)
The file or folder name contains characters that are not permitted. Please use a different name.above logs i found in ULS.
When i open that Page Layout in designer "Data Form Webpart " displays the error as below.
"The server returned a non-specific error when trying to get data from the data source. check the format and content of your query and try again. if the problem persists contact the server administrator."
Could anybody help me to find the error from above logs.
Thanks & Regards
Every once in a while on our web front ends we get this error. no uhmc-sp-app01 has not been a part of this farm for quite some time. It was at one time our "application" server (a physical server) , but since we have replace it with app02 and app03(virtual servers) We went through the process of uninstalling sharepoint on that server and removing it through central admin and what not .. but it still appears that something references this server every once in a while .. and I think it has caused some erratic behavior at times.. random errors saving a form, random errors in search.. and the errors seem to coincide with this error (which could be my imagination) .. Any ideas how to get sharepoint to stop looking at that old server for topology services?
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: w3wp
Process ID: 7916
AppDomain Name: /LM/W3SVC/2053670262/ROOT-1-130184307893738340
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:da6811af8ea549538690adcad5e91a62#authority=urn:uuid:4597d74d77e849e1a9129decefa7e10f&authority=https://uhmc-sp-app01:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:1
Affected Endpoint: http://uhmc-sp-wfe03:32843/da6811af8ea549538690adcad5e91a62/SearchService.svc
Hi,
I'm migrate (Test zone) SP2007 > SP2010 no error any webpart.
And then i'm migrate SP2010 > SP2012, there are many missing webpart.
Example missing: 0b38cca7-0a5b-c334-66ea-1572d3d7f81a Type="Microsoft.SharePoint.Portal.WebControls.OWACalandarPart"
I'm query by SQL Server Management Studio tool with webpart ID 0b38cca7-0a5b-c334-66ea-1572d3d7f81a and found that it's in tp_ZoneID MiddlerightZone
OK, it's missing webpart ? i'm open that site in SP2010 and Edit page, go to Middle Right Zone, not found OWACalendarPart !!?
then i'm open same site in SP2013 and Edit page, go to Middle Right Zone, not found OWACalendarPart too.
When it's not found in SP2010 page why it's missing in SP2013 ?
On my SharePoint farm, I have two WFE.
OUr DNS is set so that http://intranet.mycompany.com feeds to our WFE.
Recently, within the past week and after 18 months of no problems, one of the WFE are not working as they should. So a user may hithttp://intranet.mycompnay.com and get sent to WFE1 or WFE2. For some reason WFE2 was not working. So some of our users were getting to sites and some were not.
I did an iisreset on WFE2. Checked the error logs and looked around for other errors that would lead me to a resolution. In the end, a reboot of WFE2 fixed the issue. Until it happened again four days later. Same symptoms and same resolution.
Is there something on the WFE that times out after a while, that i can check here?
Thanks
LSTalbot
We have our ASP.net web application hosted on a SharePoint Server 2010. Our application uses oracle database to save and retrieve data.For our application to work on SharePoint server we need to install Oracle client software.
Our SharePoint Server architecture consists as following
2 web front ends, Index Server, Crawl Server, application server and a load balancer.
I am not the admin on the SharePoint server and trying to figure out if i have to install Oracle client on server where do i install it? Do i need to install it on all our servers or just the web fronends. Can some one please help me with this?
D
Hello everyone,
I ran into an issue and can't insert any image on content editor webparts in publishing sites. Error message shows in the UI (added a screenshot below) -
"Unable to display this web part. To troubleshoot this problem, open the web page in....". ULS logs show below errors but I'm not able to find any clue so far. Anyone has any suggestion what may have caused this?
Here are few facts / assumptions:
Appreciate any feedback!
07/22/2013 11:46:03.16 w3wp.exe (0x2640) 0x1970 SharePoint Foundation General 90hv Unexpected Detected use of SPRequest for previously closed SPWeb object. Please close SPWeb objects when you are done with all objects obtained from them, but not before. Stack trace: at
Microsoft.SharePoint.SPWeb.get_ParentWeb() at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationContext.UpdateSelectedPathWithWeb()
at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationContext.InitializeSelectedPathAndTreeValues(NameValueCollection queryString)
at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationContext.get_SelectedNodePath() at
ASP._layouts_assetportalbrowser_aspx.CallSetLoc() at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.Control.OnDataBinding
(EventArgs e) at Microsoft.SharePoint.WebPartPages.WebPart.OnDataBinding(EventArgs e) at
Microsoft.SharePoint.WebPartPages.DataFormWebPart.PerformSelect() at Microsoft.SharePoint.WebPartPages.DataFormWebPart.DataBind() at
Microsoft.SharePoint.WebPartPages.DataFormWebPart.EnsureDataBound() at Microsoft.SharePoint.WebPartPages.DataFormWebPart.CreateChildControls() at
Microsoft.SharePoint.WebPartPages.BaseXsltListWebPart.CreateChildControls() at Microsoft.SharePoint.WebPartPages.WebPartMobileAdapter.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls() at System.Web.UI.Control.PreRenderRecursiveInternal() at
System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at
System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at
System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean
includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at
System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP._layouts_assetportalbrowser_aspx.ProcessRequest
(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps
(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at
System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at
System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at
System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
85d9b190-e23f-4798-aa10-5707f2010c9f
07/22/2013 11:46:04.13 w3wp.exe (0x2640) 0x1970 SharePoint Foundation Web Parts 89a1 High Error while executing web part:
System.NullReferenceException: Object reference not set to an instance of an object. at System.Xml.Xsl.XslCompiledTransform.Load(MethodInfo executeMethod,
Byte[] queryData, Type[] earlyBoundTypes) at Microsoft.Xslt.STransform.GetCompiledTransform() at
Microsoft.SharePoint.WebPartPages.BaseXsltListWebPart.LoadXslCompiledTransform(WSSXmlUrlResolver someXmlResolver) at
Microsoft.SharePoint.WebPartPages.DataFormWebPart.GetXslCompiledTransform() at
Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 85d9b190-e23f-4798-aa10-5707f2010c9f
BlueSky2010
Please help and appreciate others by using forum features: "Propose As Answer", "Vote As Helpful" and"Mark As Answer"
Dear Experts,
I want to get Top Referrers for my site in web analytics report
There is some issue in getting Top Refferers in my OOTB web analytics Reports Summary page.
Top Referrers means- How do visitors find your site
Let me know what it means and what inputs are needed to get this value?
sudhanshu sharma Do good and cast it into river :)
Hello,
What is the process for updating my 2008 R2 RTM SSRS Add-in for SharePoint to SQL Server 2008 R2 Service Pack 2? It seems like I would need to re-install and re-configure my existing RTM configuration of this (I have 2008 R2 and SharePoint 2010 working in integrated mode already).
I found the download site but the instructions don't seem to address applying the service pack alone.
Thanks,
Sean
Hi,
I tried to install the SharePoint 2010 Cumulative Update (July 2013 CU released on 7/10/2013) but get mixed result.
In the environment of SharePoint 2010 (SP1 + April 2013 CU) + SQL 2008 R2 + Office Web Apps + Project Server, the installation is successfully completed.
However, In the environment of SharePoint 2010 (SP1 + April 2013 CU) + SQL 2012 (SP1 + CU4) + Office Web Apps + Project Server + PowerPivot + SSRS integrated mode, the installation ended with a message "The installation of this package failed". No error registered in event log.
Does anyone have the same issue? What is the workaround?
Thanks.
Hi,
i Need to move a sub site to a site collection and when done change the theme to look the same as all the other sites but ran into a issue.
i Create the destination team site and the theme's work with no issue.
Then i run my command after which the theme looks like this:
Why will this happen.
There was some errors saying it cant over write the Master Page. In total n think 10 errors but will have to load them later. Dont have access to log at the moment.
Anyone seen this behavior before?
We have a doc library that behaves like no other ones we have!
Site collection feature and library settings are both set to open the docs in the default browser.
However when a user with read only permissions tries to open an excel doc they get the error (in a web app window) that the workbook can not be opened.
When users with contribute rights click it, it opens in excel perfectly.
Thinking this may be a macro/formula thing I uploaded a new excel doc with nothing more than "hello" in A1.
Exactly the same issue.
Unable to open unless have at least contribute.
If I have flicked off "require check out before edit" (which shouldn't come into it but as a test) and no change.
Any ideas?